Salt / Electrolyte Update

if you are not testing you are guessing. Since we have been running labs on fasting groups, I'm noticing levels of potassium in the blood that are too high.

***Note: I don't have before and after labs on the HRP 4-day fasting group yet, so these conclusions and recommendations are based on the people in the 40-day fast program. ***

Here are 2 examples:

These levels are NOT dangerously high. But I did some research on potassium intake requirements for athletes vs more sedentary people.

Here is my conclusions:

For the majority of us who are NOT endurance athletes:

Take an electrolyte that is at or less than: 5 parts sodium and 1 part potassium. That is, a ratio of <= 5 to 1.

The one we recommended for the 4-day fast is ZeroLyte Salty Berry Lemonade

This is a 2-to-1 ratio, so I consider it too high to be taken daily. However, you 4-day fasters are not taking it every day, but just for the 4 days of the fast. Regardless, I do recommend you consider switching to LMNT (see below)

However, some people are using other electrolytes. Here is the electrolyte SALTT

Sodium: 968

Potassium: 408

This is roughly a 2.5-to-1 ratio.

Based on lab results, I believe this might be a bit high for those NOT engaging in regular (at least 4 days/week) strenuous or endurance exercise.

For those taking SALTT or one with a ratio of sodium to potassium, like in SALTT, may I recommend LMNT as an alternative:

This ratio is 5 to 1, which I believe is optimal for most participants in the fasting program

---

Label Reading Warning:

If you are easily confused by math, read no further, instead just use LMNT as your electrolyte.

Here is the information on the ZeroLyte presented by fullscript.

I looked at the ratio of sodium to potassium and concluded it was appropriate. However, sea salt contains SODIUM AND CHLORIDE. So the ratio between sodium and potassium cannot be determined from this information. It looks like a 5 to 1 ratio, but it is NOT!

The following is the supplement facts:

The sea salt contains both sodium AND CHLORIDE.

HOWEVER, if you subtract the amount of chloride in the sea salt, you get the actual amount of sodium, which is 1000mg. This means the ratio of sodium to potassium is 2:1. This is probably too much potassium for those not engaging in rigorous exercise.

Again, switch to LMNT. An alternative is to add an appropriate amount of sea salt to the electrolyte you are currently using.

How much sea salt do you need to add to your electrolyte? My suggestion is to measure your electrolyte and add approximately 2.5 times (3 to be safe) the amount of sea salt to it. So, if you measure out a tablespoon of the ZeroLyte, add 2 tablespoons of sea salt.

The math: Currently, the ZeroLyte product is at a 2:1 ratio.

When you add 1 tablespoon of sea salt, you will dilute the potassium to a ratio of 4:1 - this is acceptable.

When you add 2 tablespoons of sea salt, you will dilute the potassium to a ratio of 6:1 - this is an option too.

---

Here is an article on the potassium needs of endurance athletes.

I would send the link but they made a serious mistake on the ratio (reversed sodium and potassium), so instead, I am reproducing and editing the article.

Every athlete knows the frustration of hitting a wall during training or feeling their muscles seize up just when they need peak performance. What many don't realize is that the culprit often lies in a fundamental imbalance of sodium and potassium. These two electrolytes work together in a delicate dance that powers every muscle contraction, nerve signal, and drop of sweat your body produces.

This comprehensive guide will equip you with evidence-based tips for balancing sodium and potassium to optimize your athletic performance, prevent muscle cramps, and maintain proper hydration. You'll learn how to calculate your ideal electrolyte ratios, identify the best food sources, and develop personalized strategies that match your training demands.

Understanding Electrolyte Balance: Why Sodium and Potassium Matter for Athletes

The sodium-potassium pump is one of your body's most critical mechanisms for athletic performance. This cellular process maintains the electrical charge across cell membranes, enabling muscle contractions and nerve transmissions. When this electrolyte balance becomes disrupted, your performance suffers immediately.

Research published in the Journal of Athletic Training shows that even mild electrolyte imbalances can reduce muscular power output by up to 15%. For athletes, this translates to slower sprint times, reduced endurance capacity, and increased injury risk. The sodium-potassium relationship is particularly crucial because these minerals work in opposition - sodium primarily exists outside cells while potassium concentrates inside them.

Competitive athletes face unique challenges that recreational exercisers don't encounter. High-intensity training sessions can result in sodium losses of 1,000-3,000mg per hour through sweat, while potassium losses typically range from 150-300mg hourly. These losses vary significantly based on individual sweat rates, environmental conditions, and training intensity.

Warning signs of electrolyte deficiency during training include muscle weakness, irregular heartbeat, excessive fatigue, and mental fog. Unlike simple dehydration, electrolyte imbalances can persist even when fluid intake appears adequate, making proper sports nutrition electrolytes essential for consistent performance.

The Optimal Sodium Potassium Ratio for Athletic Performance

Scientific research indicates that the ideal sodium potassium ratio for athletes differs significantly from general population recommendations. While sedentary individuals should get their potassium from foods like beans, mushrooms, and avocados, athletes often require supplementation with electrolytes to achieve ratios of 2:1 or 3:1 during intense training periods.

Endurance athletes typically need higher sodium replacement due to prolonged sweat losses, while strength athletes may require more potassium to support rapid muscle contractions. A study in the International Journal of Sport Nutrition found that marathon runners performed best with sodium intakes of 700-1,000mg per hour combined with 200-300mg of potassium.

Individual sweat testing provides the most accurate method for determining personal electrolyte needs. This process involves weighing yourself before and after training sessions while tracking fluid intake. For every pound lost, you've sweated approximately 16 ounces of fluid containing 200-700mg of sodium and 150-300mg of potassium.

Climate and seasonal factors significantly impact maintaining electrolyte levels. Hot, humid conditions increase sweat rates and electrolyte losses, requiring ratio adjustments. Cold weather training may reduce obvious sweating but still result in significant electrolyte losses through respiration and less noticeable perspiration.

Sodium Intake Guidelines: How Much Is Too Much for Athletes?

Standard dietary guidelines recommend limiting sodium to 2,300mg daily, but these recommendations don't account for athletic training demands. Research from the American College of Sports Medicine suggests that athletes may safely consume 3,000-5,000mg of sodium daily when combined with adequate potassium intake and proper hydration.

High-intensity training sessions lasting over 60 minutes typically require 200-700mg of sodium per hour to maintain performance sports hydration. This requirement increases dramatically in hot environments or for athletes with high sweat rates. Some ultra-endurance athletes may need up to 1,000mg of sodium hourly during competition.

Hidden sodium sources in sports nutrition products can quickly exceed intended intake levels. Many commercial sports drinks contain 100-200mg of sodium per 8-ounce serving, while energy gels may provide 50-200mg per packet. Reading labels carefully helps prevent accidental overconsumption while ensuring adequate replacement.

Balancing immediate performance needs with long-term health requires strategic timing. Consuming higher sodium amounts around training sessions while maintaining moderate intake during rest periods helps optimize both athletic performance and cardiovascular health. This periodized approach allows athletes to meet training demands without compromising long-term wellness.

Potassium Rich Foods Every Athlete Should Include

Incorporating potassium rich foods into your daily nutrition plan provides sustained electrolyte support beyond what supplements alone can offer. Bananas, often considered the gold standard, contain approximately 400mg of potassium, but many other foods provide superior concentrations with additional performance benefits.

Sweet potatoes lead the pack with 540mg of potassium per medium potato, plus complex carbohydrates for sustained energy.

Spinach provides 840mg per cooked cup along with iron and folate for oxygen transport. Coconut water naturally contains 600mg per cup with a favorable sodium-potassium ratio for post-exercise recovery.

White beans offer an impressive 1,000mg of potassium per cup, making them excellent for athletes following plant-based diets. Salmon provides 500mg per 3-ounce serving while delivering high-quality protein for muscle recovery. Avocados contribute 975mg per fruit along with healthy fats that support hormone production.

Meal timing strategies significantly impact potassium absorption and utilization. Consuming potassium-rich foods 2-4 hours before training allows for optimal uptake without causing digestive distress. Post-workout meals should emphasize potassium replacement within 30-60 minutes to support rapid recovery processes.

Pre-Workout Potassium Loading Strategies

Strategic potassium loading 2-4 hours before intense training sessions can enhance performance and reduce cramping risk. A pre-workout meal containing 400-600mg of potassium provides optimal muscle preparation without overwhelming digestive capacity.

Portion sizes should balance electrolyte needs with digestive comfort. A medium banana with 2 tablespoons of almond butter provides approximately 450mg of potassium plus healthy fats for sustained energy release. This combination digests easily while providing steady nutrient availability throughout training.

Combining potassium with magnesium and calcium enhances absorption and muscle function. Foods like yogurt with berries and nuts provide this synergistic combination naturally, supporting both immediate performance and long-term muscle health.

Preventing Muscle Cramps: The Electrolyte Connection

Exercise-induced muscle cramps result from complex interactions between electrolyte imbalances, neuromuscular fatigue, and altered muscle excitability. While dehydration often receives blame, research shows that muscle cramps electrolytes play a more significant role than fluid status alone.

The sodium-potassium pump dysfunction appears to be the primary mechanism behind exercise-associated cramping. When this cellular process becomes impaired due to electrolyte depletion, muscles lose their ability to relax properly after contraction, resulting in sustained, painful spasms.

Immediate intervention strategies during training include gentle stretching combined with electrolyte replacement. Consuming 200-300mg of sodium with 100-150mg of potassium can provide rapid relief within 15-30 minutes. Pickle juice has gained popularity among athletes for its high sodium content and rapid absorption rate.

Long-term prevention requires consistent attention to daily electrolyte intake rather than just during exercise. Maintaining adequate baseline levels through proper nutrition ensures that training sessions don't deplete stores to critically low levels. This preventive approach proves more effective than reactive supplementation.

Hydration for Athletes: Beyond Just Water

Proper hydration for athletes extends far beyond simply drinking water. Pure water consumption during intense exercise can actually dilute blood sodium levels, leading to hyponatremia - a potentially dangerous condition that impairs performance and health.

Pre-hydration protocols beginning 24 hours before competition help ensure optimal fluid and electrolyte status. This involves consuming 16-20 ounces of fluid with 200-300mg of sodium 2-3 hours before exercise, followed by another 8 ounces 15-30 minutes prior to activity.

During-exercise replacement strategies should match individual sweat rates and electrolyte losses. For sessions lasting 60-90 minutes, consuming 6-8 ounces of fluid containing 100-200mg of sodium every 15-20 minutes maintains optimal hydration without causing gastric distress.

Environmental factors dramatically affect hydration needs and electrolyte requirements. Hot, humid conditions can double or triple fluid and sodium losses compared to temperate environments. Altitude training increases respiratory water losses while cold weather often masks dehydration symptoms, requiring adjusted monitoring strategies.

DIY vs. Commercial Sports Drinks Comparison

Creating homemade electrolyte solutions offers cost savings and greater control over ingredients compared to commercial products.

Commercial products often contain artificial colors, flavors, and preservatives that some athletes prefer to avoid. However, they offer convenience and consistent electrolyte concentrations, simplifying nutrition planning during competition or travel.

The customization benefits of DIY solutions enable athletes to adjust sodium-potassium ratios to their individual needs and preferences. This flexibility proves particularly valuable for athletes with specific dietary restrictions or those competing in extreme environmental conditions.

Post Workout Recovery Drinks: Optimizing Electrolyte Replenishment

The concept of a strict 30-minute recovery window has been largely debunked by recent research, but prompt electrolyte replacement still offers performance benefits. Post-workout recovery drinks should focus on replacing lost electrolytes while supporting muscle protein synthesis and glycogen replenishment.

Combining electrolytes with protein and carbohydrates enhances recovery through multiple mechanisms. The sodium-glucose co-transporter improves fluid absorption, while protein provides amino acids for muscle repair. A 3:1 or 4:1 carbohydrate to protein ratio with 300-500mg of sodium optimizes this recovery process.

Natural recovery drink recipes can provide superior nutrition compared to processed alternatives. Blending coconut water, banana, Greek yogurt, and a pinch of sea salt creates a recovery beverage with optimal electrolyte ratios plus additional vitamins and minerals for comprehensive recovery support.

Evening electrolyte balance significantly impacts sleep quality and next-day performance. Consuming a small amount of potassium-rich foods before bed helps maintain cellular function during sleep and supports muscle recovery during rest periods.

Frequently Asked Questions

How do I know if my sodium potassium ratio is balanced?

Monitor your energy levels, muscle function, and recovery between training sessions. Signs of proper balance include consistent energy throughout workouts, absence of muscle cramps, and normal heart rate patterns. Blood testing can provide precise measurements, but performance indicators often serve as practical assessment tools for most athletes.

Can too much potassium be harmful for athletes?

Excessive potassium intake can strain kidney function and potentially cause hyperkalemia, especially in individuals with kidney disease. Healthy athletes typically tolerate high potassium intakes well, but consuming more than 4,700mg daily from supplements should be done under medical supervision. Food sources rarely cause toxicity issues.

What's the best time to consume electrolytes during long training sessions?

Begin electrolyte replacement within the first 15-30 minutes of exercise lasting over 60 minutes. Continue consuming 100-200mg of sodium with 50-100mg of potassium every 15-20 minutes throughout the session. This consistent approach prevents depletion rather than trying to correct imbalances after they occur.

Do plant-based athletes need different electrolyte strategies?

Plant-based athletes often consume higher potassium levels naturally but may need to focus more on sodium replacement during training. Plant sources of electrolytes generally have excellent bioavailability, though combining vitamin C-rich foods with plant-based iron sources can enhance mineral absorption for optimal performance.

How does altitude training affect electrolyte needs?

Altitude training increases respiratory water losses and can elevate sodium needs by 20-30% compared to sea level training. The acclimatization period typically lasts 10-14 days, during which electrolyte monitoring becomes particularly important. Increased urination during altitude adaptation also elevates potassium losses requiring dietary adjustments.

Conclusion

Mastering sodium and potassium balance represents one of the most impactful yet underutilized strategies for athletic performance optimization. The evidence clearly shows that proper electrolyte management can prevent muscle cramps, enhance endurance capacity, and accelerate recovery processes. By implementing the sodium potassium ratio guidelines, incorporating potassium rich foods strategically, and developing personalized hydration protocols, athletes can unlock new levels of performance while supporting long-term health. Remember that individual needs vary significantly based on sweat rates, training intensity, and environmental conditions, making personal experimentation and monitoring essential for optimal results.

---

Be Bold - Be Brave - Stay Well

---